High Technology for CMC Applied in Detergent Industrial Use
Basic Info.
Model NO.
detergent grade cmc
Usage
Water Treatment Chemicals
Loss on Drying
Less Than 10%
Mf
[C6h7o2(Oh)2CH2coona]N
Sieving Limits (80 Mesh)
Above 98%
D.S
Above 0.8 or as Per Your Request
Transport Package
Multi-Layer Paper Bag
Product Description
Chemical CMC Supplier Carboxyl Methyl Cellulose Thickening Agent Thickener Uses In Liquid Detergents Soap CMC Detergent Chemical
Specifications
1) CAS NO. 9004-32-4 Sodium carboxymethyl cellulose
2) Factory = Competitive Price Sodium carboxymethyl cellulose
3)Molecular Formula:C8H11O5Na Sodium carboxymethyl cellulose
4) ISO9001-2008 Sodium carboxymethyl cellulose
Please note: We supply all kinds of sodium CMC / PAC, powder and granulated available. We can also produce the products according to your request. cmc price
The different types of detergent grades of CMC are produced in the limits of detergent grade specifications but they will be divided into different variations due to customer demands. The customer satisfaction, price sensitivity and other expectations are fully covered by these variations. DT is the standard quality for powder detergent grade CMC. DTE is a preferred quality where the market is price-sensitive. DTH is especially an improved quality for high volume capacity plants which are using an automatic dosing system.
For the cream type of detergents, there are two qualities which have different viscosity values. The EW, can also be used in various industries where the water absorption is highly needed. Especially in hot climates EW can be used as a viscosifier agent or additive to prevent quick drying.
The standard qualities with their chemical specifications are shown on table below. The below mentioned specifications can be changed according to customer demands or requests.
| Type |
DT |
DTE |
DTH |
DK |
EW |
% Active Content
On dry basis |
min. 70 |
min. 65 |
min.60 |
| 2% Viscosity (cps) |
20-100 |
10-50 |
20-100 |
min. 200 |
min. 400 |
| D.S* (+/-0.05) |
0.55 |
0.45 |
0.55 |
0.5 |
0.6 |
| % Moisture |
max. 8 |
| pH(1% sol.) |
7-10.5 |
| Appearance |
White to cream white, free flowing powder |
White powder |
White powder & granules |
| *At 25 Co, 2% water solution, Brookfiled Viscosimeter |
In general, the following is the specification of CMC for detergent industry:
thickener for liquid detergents cmc price
| % CMC (Active Content) |
65 - 70 (On Dry Basis) |
| Degree of Substitution |
0.4 - 0.6 |
| pH (1%Solution) |
8.5 - 10.5 |
Viscosity
(4% Solution) |
200 - 2.000 cps |
| % Moisture |
8 - 9 (As Packed) |
For cream type detergents, the viscosity level should be relatively higher.
The characteristics Of FUSHIXIN's PAC polyanionic cellulose cmc price
Our company's PAC polyanionic cellulose have strong water-soluble, good anti-salt, anti-calcium and magnesium, reduce filtration loss capacity, because we adopt special processing technology to produce PAC, it can be applied to different drilling fluid system. Especially in salt water drilling, seawater drilling, saturation salt water drilling, and all have a very good role in filtration loss. Compared to the CMC which produced by conventional process, it has the following characteristics: carboxymethyl cellulose price
(1) Uniform D.S, good transparency, controllable viscosity and filtration loss;
(2) Fit for water-based mud of fresh water, seawater and saturation salt water;
(3) Confected mud has good characteristic in reducing filtration loss, restraining and enduring high temperature;
(4) Confected mud has good rheology, it can restrain the dispersion and expansion of shale and clay in the high-salt medium, so that the pollution of the wall of a well under controlling;
(5) Made the soft soil structure stability to prevent the collapse of the wall;
(6) Slowed down the accumulate of solids in the mud, when well-drill get across the rock face;
(7) Restrained the turbulence in drill pipe, so that the circumfluence system can maintain a minimum pressure loss;
(8) Enhanced the yield of clay of the mud, reduced the filtration loss;d cmc price
(9) Obtained stable foam mud. cmc price
What is CMC sodium carboxymethylcellulose?
CMC is a kind of important cellulose ether and a good water-soluble polyanionic compound obtained from chemically modified natural fibers, soluble in cold water. It has unusual and extremely valuable comprehensive physical and chemical properties such as emulsifiablity, dispersion, solid dispersion, non-perishability, physiological harmlessness, etc., and is a kind of widely-used natural polymer derivatives.
The superior properties of Na CMC include: thickening, water retention, metabolism inert, film formability, dispersion stability, etc. It can be used as thickeners, water retention agents, binders, lubricants, emulsifiers, assistant deflocculants, tablet substrate, biological substrates and carriers of biological products.
Product Description
Function and Application of FUXIN Carboxymethyl Cellulose Na CMC chemical
| Products |
Function and Application |
| CMC Food Grade |
CMC is widely used in food industry, it play the roles of taste improvement, thickening and stabilization when used in various kinds of dairy drinks and seasonings. As an additive of molding, taste improvement, anti-fragmentation, water retaining and tenacity strengthening, CMC is also used in ice cream, bread, cake, biscuit, instant noodle and fast paste foods.
The recommended addition is 0.3-1.0%. |
| CMC Toothpaste Grade |
CMC has an efficiency of adhesion and molding when used in toothpaste, and stabilizes the quality of toothpaste owing to good compatibleness.
The recommended addition is 0.5-1.5%. |
| CMC and PAC for Oil Drilling |
CMC and PAC can reduce water loss, and increase viscosity in drilling fluid, cementing fluid and fracturing fluid. They play the roles of protecting the wall of well, taking drilling trifles, protecting drilling bit, preventing mud loss and increasing drilling rate.
Usage: add to mud directly or glue solution preparation.
Addition:
0.1-0.3% in fresh water mud;
0.5-0.8% in salt water mud. |
| CMC Ceramic Grade |
CMC is used for ceramic embryo, glazing pulp and colored glaze in ceramic industry.
Addition:
0.03%-0.2% used in ceramic embryo;
0.05-0.2% used in glazing pulp;
1.4-4.0% used in colored glaze. |
| CMC Paper Grade |
In making paper, CMC is used in making pulp so as to improve the retention rate and increase humidity and strength; when used in surface sizing, CMC can improve internal adhesion, decrease printing dust and enhance printing quality as molding reagent. In paper coating, CMC also helps the dispersion and fluidity of paint, improves appearance of paper and smoothness, upgrades optical performance and printing adaptability.
Addition: 0.3-1.5%. |
| CMC for other industries |
As coagulant, water retaining, thickener and binder, CMC is also used in paint, carpet gum, mosquito coil incense, tobacco, electric welding, textile, battery, printing and others. |
Packaging & Shipping
Packing:
Option 1: 25kg kraft bags with PE inner Sodium carboxymethyl cellulose
Option 2: According to cutomers' requirements Sodium carboxymethyl cellulose
Delivery Time: Sodium carboxymethyl cellulose
Factory packing design: 30 days after receive 30% deposit
customized design:40 days after receive 30% deposit
For urgent order, Could be faster, please send email to negotiate
Our Services
1.OEM service is welcome.
2.Free samples are available for your testing,but you may need to pay the express fees.
3.Your requirements and complaints are highly respected.
Company Information
FAQ
How to make an order?
Sample approval
1,Client make 30% deposit or open LC after receiving our PI
2,Client approve our sample,
Arrange shipment
1,supplier arrange necessary documents and send copy of these documents
2,Client effect balance payment
3,supplier send original documents or telex release the goods
Payment:
We usually accept T/T(with 30% deposit, the balance before shipment);
L/C at sight, please send email to negotiate payment term if you can not accept T/T or L/C.
Why choose us?
1. We produce material by ourselves, which makes more competitive price and faster delivery
2. We provide OEM service
3. We have great experience on provide high quality service to retailers
4. We tested products every one.
More details please click here to our company profile.
Or visit our website: fushixin.en.made-in-china.com
Please Feel Free to Contact Us! Looking forward to your visiting.
Contact information
Company Profile
Foshan Fushixin Polymer Fiber Co., Ltd. is a large chemical high-tech enterprise mainly of R & D, production and sales of sodium carboxymethyl cellulose (CMC). The company was founded in 2002 and built a whole new sodium carboxymethyl cellulose factory in August 2012 with a total investment of 90,000,000 yuan. The Company also invested 250,000,000 yuan in Xinjiang and self-built a cotton production base covering an area of 5000 acres, with more than 200 employees in the production base. Foshan headquarters owns 120 staff, including 18 professional engineering and technical personnel, 6 chief engineer and 85 undergraduate students. It has become the only polymer materials manufacturing base that can achieve an annual output of 15,000 tons and annual output value of 250,000,000 yuan in Guangdong province.
The company's main products are: battery - welding pieces of CMC, detergent-grade CMC, coating-grade CMC, paper-grade CMC, CMC of oil drilling, cosmetic-grade CMC, textile-grade CMC, mosquito coil-grade CMC, glazed ceramic-grade CMC, food-grade CMC, ceramic body-grade CMC and various customized CMC products.
Company's products are widely used and its main sales objects are food industry, ceramic industry, washing industry, oil drilling industry, paper industry and other broad areas of application. Selling pattern includes sales with agents, distributors, direct marketing, e-commerce and other diversified marketing channels. The quality of the products has been well received in the market at home and abroad and takes up the leading position in the industry. Products are exported to the Middle East, Italy, Spain, Vietnam, Japan, and the United States and other overseas countries and regions. Besides, the company also fixes reasonable prices. The major raw cotton is produced for personal use, so the production costs are lower than the same industry, and the sales prices are also more competitive than other fibers industries.
Your message must be between 20-3,000 characters!
